On The Ebay...

HERE

BSA For Sale...

This 1954 A10 chopper project could be yours.

Bottom end has been gone through, mag is good, trans is good. 

Needs top end gone through.

$2500.00

Will listen to reasonable offers.

Deluxe...

Motorcycle trailer for sale.

A friend of ours has this beautiful one of a kind custom built two bike trailer that he is looking to sell.

Here's some details, 

Dropped axle, coil over shocks, 4 link suspension, 6x10 oak and aluminum bed, wiring in frame tubing, nerf bars, stainless steel grill, 36 Ford fenders, frenched 39 teardrop tail lights, 28" wide ramp, Cragar rims, tows great, licensed for eternity.

$3500

reasonable offers considered

call or text Doug @ 480.250.5618

or email haifleybros@gmail.com

Brains...

Is selling his body!

Fiberglas Works BSA/Triumph body with original seat and paint.

Contact him here brainsoflove@live.com 

Bargain Basement Prices...

On this (barely) used Haifley Bros. solo seat.

$200 and it could be yours, regularly $265

You could take the money you save and put it toward a matching p-pad

Or you could put it toward gas money you'll need while riding around on this sweet seat

Or you could get a couple buddies together and get 'em drunk at the bar

Or instead of the bar, you could get some meat, some coals, and some beers and have a BBQ

Or if the decision is too much you could just send the savings to us and we'll have a BBQ...

Just sayin'

Get 'Em While They're Hot...Rod...

Be the first on your block to get yer mitts on one of these snappy little numbers.

Check out our Merchandise button at the top 'o the page.

AZ Nick Says...

Always wear proper safety gear when riding

(this super sweet survivor is for sale! ngoerdt@gmail.com )

Cover Yer Dome...

With a new Haifley Brothers hat.

Sweet new Red/White/Blue logo by Bill Bryant

Black, Red, or Blue mesh w/white front

Get Keen!

Up For Grabs...

Nick is thinning out his stable and this bad chicken could be yours!

Custom built 1978 Shovelhead. Titled as a 2005 Santee. Proven,reliable and ready to ride.

-"78 cone shovelhead, Andrews AB cam, Jims Big Axle Lifters, SU Carb

-4 speed ratchet top

-Santee frame - stock dimensions

-39mm narrowglide - filled top tree, fully shaved lowers

-Spool front

-clip ons off an FZR?

-'34 Ford spare tire cover fender

-Custom made shifter/clutch

-Rib added to tank to match the fender

-1 1/2" belt drive primary, Barnett clutch & springs

-S&S single fire ignition and Crane coil

-Avon tires

-Four piston PM style rear brake



The bike has 7-8K miles on it since it was built. It has been ridden

long distances with no trouble or breakdowns. It's well sorted out and

ready to ride. It was featured in Iron Horse Nov/Dec 2007. $9000.

Email with questions or picture requests. ngoerdt@gmail.com

Hey Big Boy...

For those of you that like a little more cushion for the... cushion.

We had a special order for a Bates style solo with a little more surface area so here it is.

This one went to Whit's brother but we liked it so much we are adding it to the lineup.

 Just like our original solo but with a 1/2in. added all around.

 These fellas will be selling for $275.00

Contact us for availability.

 Shown here with our standard 4 pleat p-pad



We're Going to Miss This One... AKA- Panhead For Sale...

Our good friend Nick is selling his righteously kick ass Panhead survivor.

We'll let him tell you about it...

It was basically built from a stock '61 FL - matching cases, proper trans, original swingarm frame

with a pan hardtail welded on, stock '61 rear brake, stock '61 dual point ignition, '61 primary, oil tank, stock controls chromed, etc. The chopper parts on it are all mid 70s aftermarket - bars, steel trees, spool, seat, Branch/Mikuni carb conversion. I replaced all the soft parts, brakes, some gaskets, and changed up the seat, otherwise it's as built 35 years ago. Featured in Dice issue #26. It's a good runner and has been ridden from Phx out to Las Vegas, CA and, Mexico. No breakdowns to speak of. It sat in a garage from '82 to '08 with a chipped gear in the ratchet top which locked it in 4th gear.

Let me know if you need anything else - you can have anyone email or call me (480) 620-3749. I'd like to get $13.5K for it.



Focus Grasshopper...

Mandy can cut p-pad foam with her eyes closed.

For Sale...

We have a couple p-pads stitched up and ready to ship

All leather construction filled with high density foam

Steel mounting eyelets.

$150 ea.

email haifleybros@gmail.com

New seats available soon...

For Sale... SOLD!

This one of our earlier Bates styled seats

Vinyl cover over a 14ga pan w/felted bottom

Slight curve at the front of the pleats.

$100 and it could be yours.
contact us at haifleybros@gmail.com